Your position: Home / RC Models / FPV Racing Drones

Mobula7 V2 75mm 2S Indoor Micro Brushless Whoop FPV Racer

    Please select the information you wantX
  • Receiver:
    Flysky RX DSMX RX Frsky Non-EU Frsky EU-LBT
(28 Units available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews

This is the latest version, it comes with the upgrade frame, lighter in weight and more resistant to crash.

Brand Name: Happymodel
Mode Name: Mobula7
Item Name: 2S 75mm Brushless Whoop racer drone BNF
Wheelbase: 75mm
Size: 98mm*98mm*36mm
Weight: 25.9g(without battery)
Weight:40g(with Original 250mah lipo battery x2 )

New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
2S whoop more powerful and more flight time
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Smartaudio ready , change VTX bands, channels via OSD (
Adjust the settings and the PID of the flight controller via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Buzzer Ready

Package includes:
Mobula7 75mm frame x 1
Crazybee F3 Pro FC with built-in receiver x 1
SE0802 16000KV motor x 4
40mm propeller (4CW+4CCW) X 1
Aio camera with VTX x 1
Buzzer x 1
3.8V 250MAH 30C battery x 4
USB lipo charger x 1
Propeller disassemble tool x 1
Screwdriver x 1

Note: DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.Due to the battery in it, the shipping time will be longer than usual.If you need us to send it by faster shipping, please write inthe comment "Send without battery".

Flight Controller


(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready


Brushless Motor


Item Model: SE0802
KV: 16000KV
Configuration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: 1.0mm
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
No. of Cell: 1-2S Lipo




Item Name: 4in1 5A ESC
Con. Current: 5A
Max. Current: 6A (3s.)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)


5.8G VTX & AIO Camera


5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V-5.5V
Current consumption: 300mA(type)

FOV120 FPV Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm
Weight: 3g


Lipo Battery


Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55x12x7mm
Weight: 6.5g
Connector: PH2.0
Note: Need 2pcs batteries for Series circuit


Frsky NON-EU RX Version



SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


Flysky Receiver Version



SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


DSM2 /DSMX RX Version


Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


Frsky EU-LBT Version
(External XM+ RX)


Support Frsky EU-LBT firmware transmitter
Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI



Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login